020-34901288




Water paint for construction machinery and auto parts

Water paint for construction machinery and auto parts

Product description: Safety, health, non-pollution, low carbon and non-toxic Main components: Waterborne alkyd resin / waterborne epoxy resin / water-borne fluorocarbon/aqueous fluorocarbon/ Amino resin/ waterborne polyurethane resin/ waterborne environmental pigments, water auxiliaries. Applicable products: Protection and decoration of metal surfaces such as engineering machinery, auto parts etc. Accessory products: SX-ALB series acrylic low temperature lacquer; SX-ALC series alkyd lacquer SX-AMB series acrylic acid medium temperature lacquer; SX-B series acrylic lacquer SX-BC series acrylic Alkyd lacquer; SX-BP series acrylic polyurethane paint(double component) SX-C series alkyd lacquer; SX-E series epoxy paint(double component) SX-EC series epoxy alkyd lacquer; SX-FP series fluorocarbon polyurethane paint(double component)




Water paint for construction machinery and auto parts





Product description: Safety, health, non-pollution, low carbon and non-toxic
Main components: Waterborne alkyd resin / waterborne epoxy resin / water-borne fluorocarbon/aqueous fluorocarbon/ Amino resin/ waterborne polyurethane resin/ waterborne environmental pigments, water auxiliaries.
Applicable products: Protection and decoration of metal surfaces such as engineering machinery, auto parts etc.
Accessory products:
SX-ALB series acrylic low temperature lacquer;
SX-ALC series alkyd lacquer
SX-AMB series acrylic acid medium temperature lacquer;
SX-B series acrylic lacquer
SX-BC series acrylic Alkyd lacquer;
SX-BP series acrylic polyurethane paint(double component)
SX-C series alkyd lacquer;
SX-E series epoxy paint(double component)
SX-EC series epoxy alkyd lacquer;
SX-FP series fluorocarbon polyurethane paint(double component)



(Guidance of construction technology)

Construction conditions: The construction temperature is above 5 centigrade, and the air humidity must be less than 80%.
Base material treatment: Base materials should be clean without oil slicks.
Construction viscosity:Use pure water to adjust the viscosity and add 5%-20% according to the weight of water lacquer. The specific amount of addition depends on the construction effect; General adopt spraying, also rolling, dip coating, must be confirmed in advance of the customers technical conditions, in order to provide the appropriate products.
Drying condition: A series of water-based lacquer products must be baked at 140-160℃ by 15-30mins by the drying road, can be packed after cooling. The self-dry paint series can be dried at normal temperature and can also be baked at low temperature to save the time. It is suggested that 60-80 ℃ * 20-30mins.


Performance index:



Test project

Index

Test Method

Paint film color and appearance

The film even, smooth, Color composite standard one

GB 1729

Gloss(60),%

90

GB 9754

Adhesion (delimi method)

0~1 grade

GB9286-98

Impact resistance

50kg.cm

GB/T 1732-93

Flexibility

1mm

GB/T 1731-93

Pencil hardness

after baked

F

GB 6739

Dried enough

H

Petrol resistance(93#)

No obvious change in 24 hours

GB1734-93

Alkali resistance(25℃0.1mol/LNaOH)

No frothing, wrinkling, and allowing  slight discoloration in 24 hours

GB1763-89

Acid resistance (25℃0.05mol/LH2SO4 )

No frothing, wrinkling, and allowing  slight discoloration in 24 hours

GB1763-89

Salt fog resistance

240 hours, no bubbles, no rusting,scratch rust≤2mm

GB 1771

Artificial accelerated aging(Q-sun),No cracking,no powdering, allow for slight discoloration and loss of gloss

1000 hours(1 grade)

GB1865-97

Temperature variation resistance (-40℃~+60℃)

Coatings do not crack and do not fall off in 10 periods



1.Before spraying, it is necessary to check whether the spray gun is clean, and whether the air compressor is normal to remove the oil and water.
2.The painting room should be clean and tidy, no dust, ash and so on.
3.The packing bucket should be sealed and the label is cleared to prevent the use of the wrong material.
4.Painting room ambient temperature should be controlled above 10 degree, the optimal range of 20-30 degrees, humidity should be controlled below 80%, the optimal range of 60-70%.
5.It is suggested that the water-based paint should be filtered by200 mesh silk cloth  after diluted, and then sprayed.
6.During construction, the surface of the coated material should be kept clean, no dust and oil pollution and so on.
7.The use period of the waterborne double component is 3h, and it is recommended to use it within 3 hours after the curing agent is added.


Quality guarantee period:The expiry date of the coating is half a year. Be sure to use it in the period of validity so as not to affect the quality of the coating。
Storage conditions: The product should be sealed and stored in the environment of
0℃-40℃.












Water paint for construction machinery and auto parts

Water paint for construction machinery and auto parts

Product description: Safety, health, non-pollution, low carbon and non-toxic Main components: Waterborne alkyd resin / waterborne epoxy resin / water-borne fluorocarbon/aqueous fluorocarbon/ Amino resin/ waterborne polyurethane resin/ waterborne environmental pigments, water auxiliaries. Applicable products: Protection and decoration of metal surfaces such as engineering machinery, auto parts etc. Accessory products: SX-ALB series acrylic low temperature lacquer; SX-ALC series alkyd lacquer SX-AMB series acrylic acid medium temperature lacquer; SX-B series acrylic lacquer SX-BC series acrylic Alkyd lacquer; SX-BP series acrylic polyurethane paint(double component) SX-C series alkyd lacquer; SX-E series epoxy paint(double component) SX-EC series epoxy alkyd lacquer; SX-FP series fluorocarbon polyurethane paint(double component)

Water paint for construction machinery and auto parts





Product description: Safety, health, non-pollution, low carbon and non-toxic
Main components: Waterborne alkyd resin / waterborne epoxy resin / water-borne fluorocarbon/aqueous fluorocarbon/ Amino resin/ waterborne polyurethane resin/ waterborne environmental pigments, water auxiliaries.
Applicable products: Protection and decoration of metal surfaces such as engineering machinery, auto parts etc.
Accessory products:
SX-ALB series acrylic low temperature lacquer;
SX-ALC series alkyd lacquer
SX-AMB series acrylic acid medium temperature lacquer;
SX-B series acrylic lacquer
SX-BC series acrylic Alkyd lacquer;
SX-BP series acrylic polyurethane paint(double component)
SX-C series alkyd lacquer;
SX-E series epoxy paint(double component)
SX-EC series epoxy alkyd lacquer;
SX-FP series fluorocarbon polyurethane paint(double component)



(Guidance of construction technology)

Construction conditions: The construction temperature is above 5 centigrade, and the air humidity must be less than 80%.
Base material treatment: Base materials should be clean without oil slicks.
Construction viscosity:Use pure water to adjust the viscosity and add 5%-20% according to the weight of water lacquer. The specific amount of addition depends on the construction effect; General adopt spraying, also rolling, dip coating, must be confirmed in advance of the customers technical conditions, in order to provide the appropriate products.
Drying condition: A series of water-based lacquer products must be baked at 140-160℃ by 15-30mins by the drying road, can be packed after cooling. The self-dry paint series can be dried at normal temperature and can also be baked at low temperature to save the time. It is suggested that 60-80 ℃ * 20-30mins.


Performance index:



Test project

Index

Test Method

Paint film color and appearance

The film even, smooth, Color composite standard one

GB 1729

Gloss(60),%

90

GB 9754

Adhesion (delimi method)

0~1 grade

GB9286-98

Impact resistance

50kg.cm

GB/T 1732-93

Flexibility

1mm

GB/T 1731-93

Pencil hardness

after baked

F

GB 6739

Dried enough

H

Petrol resistance(93#)

No obvious change in 24 hours

GB1734-93

Alkali resistance(25℃0.1mol/LNaOH)

No frothing, wrinkling, and allowing  slight discoloration in 24 hours

GB1763-89

Acid resistance (25℃0.05mol/LH2SO4 )

No frothing, wrinkling, and allowing  slight discoloration in 24 hours

GB1763-89

Salt fog resistance

240 hours, no bubbles, no rusting,scratch rust≤2mm

GB 1771

Artificial accelerated aging(Q-sun),No cracking,no powdering, allow for slight discoloration and loss of gloss

1000 hours(1 grade)

GB1865-97

Temperature variation resistance (-40℃~+60℃)

Coatings do not crack and do not fall off in 10 periods



1.Before spraying, it is necessary to check whether the spray gun is clean, and whether the air compressor is normal to remove the oil and water.
2.The painting room should be clean and tidy, no dust, ash and so on.
3.The packing bucket should be sealed and the label is cleared to prevent the use of the wrong material.
4.Painting room ambient temperature should be controlled above 10 degree, the optimal range of 20-30 degrees, humidity should be controlled below 80%, the optimal range of 60-70%.
5.It is suggested that the water-based paint should be filtered by200 mesh silk cloth  after diluted, and then sprayed.
6.During construction, the surface of the coated material should be kept clean, no dust and oil pollution and so on.
7.The use period of the waterborne double component is 3h, and it is recommended to use it within 3 hours after the curing agent is added.


Quality guarantee period:The expiry date of the coating is half a year. Be sure to use it in the period of validity so as not to affect the quality of the coating。
Storage conditions: The product should be sealed and stored in the environment of
0℃-40℃.